Shure GLXD1 Wireless Bodypack Transmitter (SB902 Battery included)
Vendor: Shure
Available

The GLXD1 Bodypack Transmitter from Shure is designed to work with Shure's GLX-D series digital wireless systems. It operates on Shure's Z2 frequency band between 2400 and 2483.5 MHz on a 2.4 GHz ISM wireless band. The transmitter provides up to a 200' range of operation and features Shure's LINKFREQ automatic frequency management that allows it to automatically link to a GLX-D compatible transmitter without having to perform any setup. It includes a rechargeable battery pack that provides up to 16 hours of performance time per charge. The battery can be recharged with the included USB charger cable. A 15-minute charge can provide up to 1.5 hours of performance time. The GLXD1 has a 4-pin TA4M connector and is compatible with both lavalier microphones as well as instrument cables with a proper adapter.
Features:
- 2.4 GHz ISM Band
- Z2 Frequency Band
- For Use with GLX-D Wireless Systems
- 200' Range of Operation
- TA4M 4-Pin Connector
- Automatic Link with Transmitter
- Includes Rechargeable Battery Pack
- Up to 16 Hours Per Charge
- Metal Construction
- Connector: 1x Unbalanced 4-pin TA4M male mini-connector
- Tuning Frequency Range: 2400 to 2483.5 MHz
- Range of Operation: 200' (60 m) (typical, depends on RF signal absorption, reflection, and interference)
- Transmit Mode: Frequency Hopping
- Frequency Response: 20 Hz to 20 kHz
- Dynamic Range: 120 dB, A-weighted
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 0.2%, typical
- RF Output: 10 mW E.I.R.P, maximum
- Operating Temperature Range: 0° to 135°F (-18° to 57°C)
- Storage Temperature Range: -20° to 165°F (-29° to 74°C)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
- Battery Life: Up to 16 hours
- Power Requirements: 3.7 V Rechargeable Li-Ion
- Input Impedance: 900 kΩ
- RF Output: 10 mW E.I.R.P. maximum
-
Maximum Input Level: 1 kHz at 1% THD
8.4 dBV (7.5 Vp-p) - Antenna: Internal Monopole
-
Pin Configuration: 1: ground (cable shield)
2: +5 V bias
3: Audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats) - Housing: Cast Metal
-
Dimensions (H x W x D): 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna
Packaging Info
-
Package Weight: 0.95 lb
- Box Dimensions (LxWxH): 11.024 x 5.433 x 3.228"