Shure GLXD14/PGA31 GLX-D Digital Wireless Headset System

Vendor: Shure
Shure GLXD14/PGA31 GLX-D Digital Wireless Headset System The Shure’s GLXD14/PGA31 Headset Wireless System includes GLXD1 bodypack transmitter, a PGA31 headset condenser microphone and a GLXD4 receiver. The system operates on the 2.4GHz ISM...
$519.00 $649.00
Title
Shure GLXD14/PGA31 GLX-D Digital Wireless Headset System

The Shure’s GLXD14/PGA31 Headset Wireless System includes GLXD1 bodypack transmitter, a PGA31 headset condenser microphone and a GLXD4 receiver. The system operates on the 2.4GHz ISM band using the Z2 frequency band between 2400 and 2483.5MHz. LINKFREQ automatic frequency management is featured in both the GLXD1 transmitter and the GLXD4 receiver. It permits them to scan for the clearest frequency available & allows to link automatically with each other without any requirement of setup from you besides turning both the units on.  With their continuous interference monitoring, both the transmitter and receiver automatically switch to the clearest frequencies available to avoid interference and dropouts. The GLXD1 includes a rechargeable battery pack that provides up to 16 hours of operation on a full charge. The system has a 200' range of operation and can be used with 7 other GLX-D systems simultaneously. 

The PGA31 headset microphone features a cardioid polar pattern, and can be used for speech and other vocal performance.

GLXD1 Bodypack Transmitter (Z2 Band: 2400 - 2483.5 MHz)

The GLXD1 Bodypack Transmitter from Shure is designed to work with Shure's GLX-D series digital wireless systems. It operates on Shure's Z2 frequency band between 2400 and 2483.5 MHz on a 2.4 GHz ISM wireless band. The transmitter provides up to a 200' range of operation and features Shure's LINKFREQ automatic frequency management that allows it to automatically link to a GLX-D compatible transmitter without having to perform any setup. It includes a rechargeable battery pack that provides up to 16 hours of performance time per charge. The battery can be recharged with the included USB charger cable. A 15-minute charge can provide up to 1.5 hours of performance time. The GLXD1 has a 4-pin TA4M connector and is compatible with both lavalier microphones as well as instrument cables with a proper adapter.

GLXD4 Digital Wireless Receiver (Z2 Band: 2400 - 2483.5 MHz)

 

 The GLXD4 Digital Wireless Receiver from Shure is designed to work with Shure's GLX-D series digital wireless systems. It operates on Shure's Z2 frequency band between 2400 and 2483.5 MHz on a 2.4 GHz ISM wireless band. Shure's proprietary LINKFREQ automatic frequency management, which scans for clearest available frequency range, will automatically link the GLXD4 and a compatible transmitter. The GLXD4 has continuous interference monitoring and will automatically switch frequencies to avoid interference and drop outs. The integrated battery charging station allows you to charge your transmitter when not in use, or a back-up battery pack while in use. Your transmitters remaining battery life is displayed on the GLXD4's front-panel LCD screen. Up to 8 systems can be used simultaneously.

PGA31 Cardioid Headset Microphone

The PGA31 Cardioid Headset Microphone from Shure is a wireframe headset condenser microphone with a cardioid pick-up pattern that can be used for a variety of vocal, general speech, and performance applications. A windscreen is included.

  • Wearable wireframe headset for multi-instrumentalists and active performers
  • Permanently charged electret condenser element for detailed vocals
  • Flexible gooseneck design and discrete adjustment options optimize microphone positioning for further source isolation
  • TA4F (TQG) connector seamlessly integrates with existing Shure bodypack systems
  • Tailored frequency response primed for great sound on vocals

GLXD1 Bodypack Transmitter (Z2 Band: 2400 - 2483.5 MHz)

  • Connector: 1x Unbalanced 4-pin TA4M male mini-connector
  • Tuning Frequency Range: 2400 to 2483.5 MHz
    • Range of Operation: 200' (60 m) (typical, depends on RF signal                        absorption, reflection, and interference)
    • Transmit Mode: Frequency Hopping
    • Frequency Response: 20 Hz to 20 kHz
    • Dynamic Range: 120 dB, A-weighted
    • RF Sensitivity: -88 dBm, typical
    • Total Harmonic Distortion: 0.2%, typical
    • RF Output: 10 mW E.I.R.P, maximum
    • Operating Temperature Range: 0° to 135°F (-18° to 57°C)
    • Storage Temperature Range: -20° to 165°F (-29° to 74°C)
    • Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
    • Battery Life: Up to 16 hours
    • Power Requirements: 3.7 V Rechargeable Li-Ion
    • Input Impedance: 900 kΩ
    • RF Output: 10 mW E.I.R.P. maximum
    • Maximum Input Level: 1 kHz at 1% THD

     

                                            8.4 dBV (7.5 Vp-p)

    • Antenna: Internal Monopole
    • Pin Configuration:

      ground (cable shield
      +5 V bias
      Audio
      Tied through active load to ground (On instrument adapter cable, pin 4 floats)
    • Housing: Cast Metal
    • Dimensions (H x W x D): 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna
    • Packaging Info
    • Box Dimensions (LxWxH): 11.024 x 5.433 x 3.228"

    GLXD4 Digital Wireless Receiver (Z2 Band: 2400 - 2483.5 MHz)

    • Outputs:  1x XLR Output

                     1x 1/4" (6.35 mm) Output

    • Output Impedance: XLR: 100 Ω

                                       1/4": 100 Ω, 50 Ω unbalanced

    • Maximum Audio Output Level Analog: XLR: 1 dBV (into 600 Ω load)

                                                                       1/4": 8.5 dBV (into 3 kΩ load)

    • Tuning Frequency Range: 2400 to 2483.5 MHz
    • Range of Operation: 200' (60 m) (typical, depends on RF signal                                           absorption, reflection, and interference)
    • Transmit Mode: Frequency Hopping
    • Frequency Response: 20 Hz to 20 kHz
    • Dynamic Range: 120 dB, A-weighted
    • RF Sensitivity: -88 dBm, typical
    • Total Harmonic Distortion: 0.2%, typical
    • RF Output: 10 mW E.I.R.P., maximum
    • Operating Temperature Range: 0° to 135°F (-18° to 57°C)
    • Storage Temperature Range: -20° to 165°F (-29° to 74°C)
    • Pin Configuration: XLR: 1= ground, 2= hot, 3=cold

                                    1/4": Tip= audio, ring= no audio, sleeve= ground

    • Antenna: Impedance: 50 Ω

                     Type: 1/2 wave sleeve dipole, non-removable
                     Max Input Level: -20 dBm

    • Power Requirements: 14 to 18 V DC (tip positive with respect to ring), 550 mA
    • Spurious Rejection: >35 dB, typical
    • Gain Adjustment Range: -20 to 40 dB in 1 dB steps
    • Phantom Power Protection: Yes
    • Housing: Molded plastic
    • Dimensions (HxWxD): 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm
    • Weight: 10.1 oz (286 g)

    Packaging Info

    • Box Dimensions (LxWxH): 2.315 x 18.25 x 13.0"

    PGA31 Cardioid Headset Microphone

    • Type: Electret condenser
    • Frequency Response: 60 Hz to 20 kHz
    • Polar Pattern: Cardioid
    • Output Impedance: 600 Ω @ 1 kHz, typical
    • Audio Output Level: -50 dBV/Pa
    • Signal to Noise Ratio: 66 dB @ 1 kHz
    • Maximum SPL: 145 dB, @ 1 kHz (1,000 Ω load)
    • Dynamic Range: 117 dB, @ 1 kHz (1,000 Ω load)
    • Output Noise: 28 dB, typical, A-weighted
    • Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
    • Polarity: Positive pressure on diaphragm produces positive voltage on                          pin 3 with respect to pin 1
    • Cable: 50" (1.3 m))
    • Connector: TA4F
    • Weight: 1.59 oz (45 g)
    • Packaging Info
    • Box Dimensions (LxWxH): 7.7 x 6.35 x 3.05"