Shure PGXD14/PGA31 PGX-D Digital Wireless Headset System
Vendor: Shure
Unavailable
Shure PGXD14/PGA31 PGX-D Digital Wireless Headset System
The Shure’s design PGXD14/PGA31 Headworn Wireless System is included with a PGXD1 bodypack transmitter, a PGA31 headset microphone, and a PGXD4 receiver. The PGXD14/PGA31 is tuned to Shure's X8 frequency band between 902 - 928 MHz. The PGXD wireless components are designed for a streamlined setup and featured with one-touch channel pairing. The PGXD14/PGA31 Headworn Wireless System operates in 24-bit/48kHz digital audio resolution. The PGA31 headset microphone is designed for getting speech and vocal performance applications.
Shure PGXD1 Digital Series Wireless Bodypack Transmitter
The Shure PGXD1 Digital Series Wireless Bodypack Transmitter is for the Shure PGX Digital Series wireless systems. The PGXD1 combines the convenience of a single-touch remote channel setup with the reliability of a 24-bit digital operation. Clean RF (Radio Frequency) performance, stable channel operation, and low noise are all attributed to PGX Digital's 24-bit / 48kHz digital operation. The bodypack transmitter is lightweight and durable, featuring a 4-pin mini microphone input. The microphone input is compatible with Shure's WL series lavaliers, headsets and instrument cables.
Pure Digital Sound
Rock-Solid Wireless Reliability
Simple Setup and Operation
Shure PGXD4 Digital Series Wireless Microphone Receiver
The Shure PGXD4 Digital Series Wireless Microphone Receiver is for the Shure PGX Digital series wireless system. The PGXD4 combines the convenience of a single-touch remote channel setup with the reliability of a 24-bit digital operation. Clean RF (Radio Frequency) performance, stable channel operation, and low noise are all attributed to PGX Digital's 24-bit / 48kHz digital operation. The receiver operates over a stable 900 MHz bandwidth for minimal noise and RF interference. The rear panel features XLR and 1/4" phone outputs. Its Scan & Sync feature automatically sets up the transmitter and receiver for stable operation.
Pure Digital Sound
Rock-Solid Wireless Reliability
Simple Setup and Operation
Shure PGA31 Cardioid Headset Microphone
The PGA31 Cardioid Headset Microphone from Shure is a wireframe headset condenser microphone with a cardioid pick-up pattern that can be used for a variety of vocal, general speech, and performance applications. A windscreen is included.
- Wearable wireframe headset for multi-instrumentalists and active performers
- Permanently charged electret condenser element for detailed vocals
- Flexible gooseneck design and discrete adjustment options optimize microphone positioning for further source isolation
- TA4F (TQG) connector seamlessly integrates with existing Shure bodypack systems
- Tailored frequency response primed for great sound on vocals
Packaging Info
- Package Weight: 0.685 lb
- Box Dimensions (LxWxH): 11.15 x 5.25 x 3.1"
Shure PGXD4 Digital Series Wireless Microphone Receiver
Packaging Info
- Package Weight: 3.2 lb
- Box Dimensions (LxWxH): 17.3 x 12.7 x 4.2"
Shure PGA31 Cardioid Headset Microphone
- Type: Electret condenser
- Frequency Response: 60 Hz to 20 kHz
- Polar Pattern: Cardioid
- Output Impedance: 600 Ω @ 1 kHz, typical
- Audio Output Level: -50 dBV/Pa
- Signal to Noise Ratio: 66 dB @ 1 kHz
- Maximum SPL: 145 dB, @ 1 kHz (1,000 Ω load)
- Dynamic Range: 117 dB, @ 1 kHz (1,000 Ω load)
- Output Noise: 28 dB, typical, A-weighted
- Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Cable: 50" (1.3 m))
- Connector: TA4F
- Weight: 1.59 oz (45 g)
Packaging Info
- Package Weight: 0.46 lb
- Box Dimensions (LxWxH): 7.7 x 6.35 x 3.05"