Turbosound TCS-152/94 Passive 2-Way Switchable Crossover Loudspeaker (500 Watts, 8 Ohms, 90x40)

Turbosound TCS-152/94 Passive 2-Way Switchable Crossover Loudspeaker (500 Watts, 8 Ohms, 90x40)

The Turbosound TCS-152/94 is a switchable bi-amp/passive, 2-way, full-range loudspeaker that is professionally designed for use in a broad array of fixed installation applications, and it comes consisting of a glass fiber-loaded 15" low frequency (LF) driver, and a 1.4" neodymium high frequency (HF) compression driver. It is capable of delivering a 2,400 Watts of peak power and comes featuring Turbosound's proprietary rotatable Dendritic waveguide which is capable of providing a 60° horizontal x 40° vertical HF dispersion pattern in an optimally-tuned enclosure. These high-grade components are being partnered with an internal passive crossover, which is capable to be bypassed for fully bi-amped operation. This loudspeaker is designed for working along in concert with Turbosound loudspeaker management systems, which will provide optimal front-of-house (FOH) performance, as well as offering considerable versatility to readily adapt to varying venue requirements.

The cabinet is finished in durable black semi-matte textured paint, and is professionally constructed from ⅝" (15mm) birch plywood with a powder coated perforated steel-mesh grille backed along with reticulated foam. The double trapezoidal cabinet shape conveniently is allowing it to be tight packed along with other TCS series enclosures. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet for enabling it to be suspended and angled in permanent installations with the use of M10 shoulder eyebolts. The loudspeaker is also fitted along with internal rigging points for use that comes with Turbosound and OmniMount wall and ceiling brackets (sold separately).

A Neutrik speakON® NL4 speaker connector is located on the rear panel, along with a 4-way barrier strip providing input and link through connections to additional TCS series cabinets.

WARNING! Mounting and/or suspension of loudspeakers should be performed by experienced professionals following all safety protocols. The improper installation of a loudspeaker can result in property damage, personal injury and/or liability to the installer or installing contractor. Proper installation is the responsibility of the person installing it.

• Arrayable, 2-way, full-range loudspeaker for installation applications
• Rotatable, Dendritic waveguide with 90° H x 40° V dispersion
• 600 Watts continuous, 2,400 Watts peak power
• Carbon fiber-loaded 15" LF driver with inside/outside wound coil
• Titanium dome 1.4" neodymium motor compression driver
• Multiple array configurations for extended coverage
• Switchable passive/bi-amp operation for flexibility of use
• Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
• Multiple internal rigging points allow bracket-mount and suspension in any orientation
• ⅝" (15mm) birch plywood enclosure with hard-wearing semi-matte black paint finish
• Architecturally-styled, powder-coated, perforated steel-mesh grille
• Neutrik speakON® NL4 and barrier strip connectors
• 3-Year Warranty Program (contact your Sales Pro for further details)
• Designed and engineered in England

• System:
• Frequency Response 41 Hz - 18 kHz ±3 dB; 35 Hz - 20 kHz -10 dB
• Nominal Dispersion: 90° H x 40° V @ -6 dB points, rotatable
• Directivity Factor (Q): 12.9
• Directivity Index (DI): 11.1
• Power Handling (IEC):
• Passive: 600 W continuous, 2400 W peak
• Bi-amp: LF: 600 W Continuous, 2400 W peak; HF: 75 W continuous, 300 W peak
• Sensitivity: 97 dB (1 W @ 1 m)
• Maximum SPL: Passive 125 dB Continuous, 131 dB Peak; Bi-amp: LF: 125 dB Continuous, 131 dB Peak; HF: 128 dB Continuous, 134 dB Peak
• Impedance: Passive: 8 Ω; Bi-amp: LF: 8 Ω: HF: 6 Ω
• Crossover Type Passive / bi-amp, switchable
• Components: 1x 15" (394mm) LF driver; 1x 1.4" (36mm) HF compression driver
• Enclosure:
• Connectors: 1x Neutrik speakON® NL4, 1x Barrier strip terminals
• Wiring: Passive: Pins 1+ / 1- input, pins 2+ / 2- link; Bi-amp: Pins 1+ / 1- LF, pins 2+ / 2- HF
• Dimensions (H x W x D): 32.8" x 18.6" x 17.8" (834 x 473 x 451mm)
• Net Weight: 63.7 lbs. (28.9 kg)
• Construction: ⅝" (15mm) birch plywood
• Finish: Semi-matte black paint
• Grille: Powder-coated perforated steel
• Flying Hardware: M10 x 9, M8 X 8 Points
• Note: further information can be found within the items located under the "Documentation" tab above.