JBL CONTROL 52 Satellite Speaker, 60 mm (2.5 in) low-distortion driver, wall-mount bracket included (priced as each, sold in pairs)
Vendor: JBL
Available
JBL CONTROL 52 Satellite Speaker, 60 mm (2.5 in) low-distortion driver, wall-mount bracket included (priced as each, sold in pairs)
Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System
This JBL CONTROL 52 is a stylish <span>satellite loudspeaker designed to produce superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which is crafted professionally with a secondary bucking magnet for high efficiency, for enhanced bass performance is its rubber half roll surround, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for reliability and high fidelity, and for more consistent impedance and extended high frequency response is its copper-capped pole piece. The wall bracket is allowing each speaker to be angled up to 45° off-axis.
For full-range wide-bandwidth performance, either 2 or 4 Control 52P mid-high speakers can be driven from the Control 50S/T pendant subwoofer (or from a Control 60PS/T pendant or Control 40CS/T in-ceiling subwoofer). The crossover for this subwoofer-satellite system is included in the subwoofer, and the system can be driven either low-impedance or from a 70V/100V distributed speaker line.
FEATURES- Stylish, unobtrusive design fits into a wide variety of decors
- Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
- 16 ohms impedance
- Wall-mount brackets included
- Available in black or white
Frequency Range (-10 dB) | 140 Hz – 20 kHz | |
Frequency Response (±3 dB) | 180 Hz – 17 kHz | |
Power Capacity | 50 Watts Continuous Program Power (2 hrs) 25 Watts Continuous Pink Noise (2 hrs) 30 Watts Continuous Program Power (100 hrs) 15 Watts Continuous Pink Noise (100 hrs) |
|
Nominal Sensitivity | 85 dB (4.0V/1m = 1W) 82 dB (2.83V, 1m) |
|
Nominal Coverage Angle | 150° x 150° (omnidirectional) | |
Rated Maximum SPL (1m) | 94 dB average, 100 dB peak | |
Nominal Impedance | 16 ohms | |
Transducer Driver | 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension. | |
Input Connector | Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) |
|
Material | High impact polystyrene, painted zinc-plated metal grille. | |
Dimensions (H x W x D) | Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in) Wall bracket: 51 mm (2.0 in) |
|
Net Weight | 0.7 kg (1.5 lbs) | |
Shipping Weight | 0.8 kg (1.8 lbs) | |
Included Accessories | Wall bracket (both speaker and wall parts), 2-pin locking connector. |