JBL CONTROL 52 Satellite Speaker, 60 mm (2.5 in) low-distortion driver, wall-mount bracket included (priced as each, sold in pairs)

Vendor: JBL
JBL CONTROL 52 Satellite Speaker, 60 mm (2.5 in) low-distortion driver, wall-mount bracket included (priced as each, sold in pairs) Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System This JBL CONTROL 52 is a stylish <span>satellite loudspeaker...
$67.00 $78.87
Color
Black
White

JBL CONTROL 52 Satellite Speaker, 60 mm (2.5 in) low-distortion driver, wall-mount bracket included (priced as each, sold in pairs)

Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System

This JBL CONTROL 52 is a stylish <span>satellite loudspeaker designed to produce superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which is crafted professionally with a secondary bucking magnet for high efficiency, for enhanced bass performance is its rubber half roll surround, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for reliability and high fidelity, and for more consistent impedance and extended high frequency response is its copper-capped pole piece. The wall bracket is allowing each speaker to be angled up to 45° off-axis.

For full-range wide-bandwidth performance, either 2 or 4 Control 52P mid-high speakers can be driven from the Control 50S/T pendant subwoofer (or from a Control 60PS/T pendant or Control 40CS/T in-ceiling subwoofer). The crossover for this subwoofer-satellite system is included in the subwoofer, and the system can be driven either low-impedance or from a 70V/100V distributed speaker line.

FEATURES
  • Stylish, unobtrusive design fits into a wide variety of decors
  • Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
  • 16 ohms impedance
  • Wall-mount brackets included
  • Available in black or white
Frequency Range (-10 dB) 140 Hz – 20 kHz
Frequency Response (±3 dB) 180 Hz – 17 kHz
Power Capacity 50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity 85 dB (4.0V/1m = 1W)
82 dB (2.83V, 1m)
Nominal Coverage Angle 150° x 150° (omnidirectional)
Rated Maximum SPL (1m) 94 dB average, 100 dB peak
Nominal Impedance 16 ohms
Transducer Driver 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
Input Connector Removable locking 2-pin connector with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
Material High impact polystyrene, painted zinc-plated metal grille.
Dimensions (H x W x D) Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
Wall bracket: 51 mm (2.0 in)
Net Weight 0.7 kg (1.5 lbs)
Shipping Weight 0.8 kg (1.8 lbs)
Included Accessories Wall bracket (both speaker and wall parts), 2-pin locking connector.