Sonifex AVN-AI16R 16 Input Dual Dante® Interface PoE

Vendor: Sonifex
Sonifex AVN-AI16R 16 Input Dual Dante® Interface PoE Up to sixteen analog inputs can be converted to the Dante Audio-over-IP networking standard with the AVN-AI16R audio converter and interface. The device's dual Ethernet...
$2,219.00
Title

Sonifex AVN-AI16R 16 Input Dual Dante® Interface PoE

Up to sixteen analog inputs can be converted to the Dante Audio-over-IP networking standard with the AVN-AI16R audio converter and interface. The device's dual Ethernet ports enable redundant operation, guaranteeing that audio routing is preserved if one of the network connections loses connection. This affordable 1U rack-mount device provides system integrators and AV specialists with a simple solution. It is easy to set up and use; all configurations, except for line-up levels, are accomplished using the standard Dante Controller software, and PoE (Power Over Ethernet) is used for power.

Key Features

  • 16 x balanced analogue inputs on XLR.
  • Adjustable global 0dBFS line-up selection (+12dBu/+18dBu/+24dBu).
  • 2 x RJ45 Dante connector (1Gb/s Ethernet Port) allowing the unit to operate in redundant or switched modes.
  • PoE and Link LED status indicators for each Ethernet port.
  • Clock LED status indicator.
  • Configuration using Dante Controller.
  • AES67 operation & Dante Domain Manager was compliant.
  • Powered by PoE on either (or both) Ethernet ports, offering power supply redundancy.
  • 1U 19" rack-mount form factor.

Network and AoIP

AoIP Standard: Dante
Number of Channels: 16 transmit
Number of Streams: 16 transmit
Sample Rate: 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Format: Linear PCM, 16, 24 or 32 bit
AES67 Support: Yes
Connectivity: 2 x RJ45
Speed: 1Gbps and 100Mbps
Network Modes: Switched or redundant
Dante Domain Manager Ready: Yes
   

Audio Input Performance Specifications

Parameter Line Input
Input Impedance: >20kΩ balanced
0dBFS line-up: User Selectable +12dBu/+18dBu/+24dBu balanced
Frequency Response: 20Hz to 20kHz, +0/-0.2dB
THD+N: <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW
Noise: -110dBFS, 20kHz BW, Rs=200Ω
Crosstalk: <-100 dB
Common Mode Rejection: >60dB @ 1kHz
   

Balanced Line Input XLR Pinout

Pin Function
1 Chassis Ground/Screen
2 Input Phase/Positive
3 Input Non-Phase/Negative
   

PoE Power

Standard 802.3af
Class 0
PD Power Range 0.44 W to 12.94 W
Typical PSE Power Usage 7 W
Max PSE Power Usage 15.4 W
   

Equipment Type

AVN-AI16R: 16 Input Dual Dante® Interface, PoE
   

Physical Specification

Dimensions (Raw): 48cm (W) x 11cm (D) x 4.3cm (H)(1U)
19” (W) x 4.3” (D) x 1.7” (H)
Weight: Nett: 1.1kg  Gross: 1.6kg
Nett: 2.4lbs  Gross: 3.5lbs