Sonifex AVN-HD1 Digital Headphone Amp for AVN-PD8/D Portal
Vendor: Sonifex
Available
Sonifex AVN-HD1 Digital Headphone Amp for AVN-PD8/D Portal
A headphone distribution system can be created by combining the AVN-PD8/D Portal with several AVN-HD1 headphone amplifiers. The unit can be installed using the CM-MNT1 desk mount panel, and the portal output connectors can feed analog power to satellite headphone amplifiers. To offer eight distinct headphone signals, the AVN-PD8/D can be coupled with additional Sonifex AVN-HD1 headphone amplifiers. Each headphone amplifier can receive a separate feed, mixed from any physical or stream inputs.
Note: The AVN-HD1 is an AES3 digital input product taking an AES3 audio feed from the AVN portals. It can be used independently of the portals by using a separate DC input for power and a separate AES3 audio input.
Key Features
- Front panel 6.35mm (1/4”) headphone socket and volume control knob, with mute/GPO push button.
- Locking DC power connector if a portal is not being used to supply the unit with power.
- AES3 digital input on RJ45 (the connector provides power to the unit and a GPO back to the portal).
- AES digital output on RJ45 (power and GPO signal are not connected).
Parameter | Specification |
Output Impedance: | Drives 150mW into 32Ω to 600Ω headphones |
D to A Line-up: | -6dBFS = +18dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-90dBu, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
Noise: | -92dBu, A-weighted |
Crosstalk: | -90dB, 1kHz, +14dBFS |
Cable: | Cat5/Cat5e/Cat6, Maximum length of 20m between Portal and AVN-HD1 if no external PSU is used |
Equipment Type |
|
AVN-HD1: | Digital Headphone Amp for AVN-PD8/D Portal |
Physical Specification |
|
Dimensions: (Raw) | 7.7cm (W) x 8.3cm (D) x 4.2cm (H) 3.0” (W) x 3.3” (D) x 1.7” (H) |
Dimensions (Boxed): | 12.7cm (W) x 22.9cm (D) x 7.6cm (H) 5” (W) x 9” (D) x 3” (H) |
Weight: | Nett: 0.22kg Gross: 0.33kg Nett: 0.49lbs Gross: 0.73lbs |
Accessories |
|
CM-MNTI | Desk Mount Panel |