Sonifex CM-HPX1 Headphone Volume Control, Passive, XLR Input - Jack Output

Vendor: Sonifex
Sonifex CM-HPX1 Headphone Volume Control, Passive, XLR Input - Jack Output With the use of two female XLR connectors, this product can connect a stereo balanced line input and produce a level-controlled headphone...
$362.00
Title

Sonifex CM-HPX1 Headphone Volume Control, Passive, XLR Input - Jack Output

With the use of two female XLR connectors, this product can connect a stereo balanced line input and produce a level-controlled headphone output. Any headphones with an impedance greater than 150Ω can be used with it because it is transformer balanced. A set of headphones set to 150 volts appears at the input to be 600 volts, which is a reasonable load for most high-quality line output stages. This is because the transformer ratio of 2:1 ensures that any headphone load presented at the output is reflected through to the input at a 1:4 ratio.

Connectors & Controls

Headphone Output

The stereo headphone output uses a stereo 6.35mm jack socket with the following connections:

Pin Type Connection
Tip: Left
Ring: Right
Screen: Ground

The headphone level will be at half the level of
the incoming signal with the volume control at 100%.

Volume Level Control

The volume level control sets the output level of the stereo headphone socket and runs logarithmically from zero to the maximum output level.

Analogue Inputs CM-HPX1

The stereo analogue input is on two female 3 pin
XLR connectors with the following pin assignments:
Pin 1: 0V Common
Pin 2: Phase
Pin 3: Non Phase

Audio Specification

 

Input/Output Level Ratio: 2:1
Input/Output Impedance Ratio: 4:1
Minimum Headphone Impedance: 150Ω
Max Input Level: +28dBu
Max Output Level: +22dBu
Frequency Response: 20Hz to 20kHz, +0/-0.5dB
Noise: <-115dBu A-wgtd
Distortion Ref +8dBu (Output): <0.01%
Common Mode Rejection: >80dB
   

Connections

 
Main Stereo Input (CM-HPX1): 2 x XLR 3 pin, female
Output: ¼” (6.35mm) A/B gauge 3-pole stereo jack sockets
   

Equipment Type

 
CM-HPX1: Headphone volume control, XLR input
   

Physical Specification

 
Dimensions (Raw): 7.7cm (W) x 8.3cm (D) x 4.2cm (H)
3.0” (W) x 3.3” (D) x 1.7” (H)
Dimensions (Boxed): 12.7cm (W) x 22.9cm (D) x 7.6cm (H)
5” (W) x 9” (D) x 3” (H)
Weight: Nett: 0.22kg Gross: 0.33kg
Nett: 0.49lbs Gross: 0.73lbs