Sonifex RB-DA6P 6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U)
Vendor: Sonifex
Available
Sonifex RB-DA6P 6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U)
The RB-DA6P is an audio distribution amplifier variant that replaces the XLR inputs and outputs with Neutrik Phoenix-type connectors. The matching connections are included with every device, making it easy to terminate cables using a tiny flat-blade screwdriver.
Although electronically balanced, the inputs and outputs might be wired incorrectly. To ensure that a short circuit on one output doesn't influence the others, each output is independently buffered. The front panel provides access to pre-set potentiometers that adjust the left and right input gain (normalizing). It is possible to adjust the output gain between -8 and 18 dB, which helps normalize professional and consumer sounds to produce outputs of 0 and -15 dBu, respectively.
Audio Specification |
|
Maximum Input Level: | +28dBu |
Maximum Output Level: | +28dBu |
Frequency Response: | 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) |
Gain Range: | Adjustable 8dB loss to 18dB gain (L & R adjust) |
Common Mode Rejection: | >66dB typically |
Input impedance: | >20kΩ bridging |
Output impedance: | <50Ω |
Distortion: | 0.01% THD @ 1kHz, ref +8dBu output |
Noise: | -100dB unity gain, ref +8dBu output |
Connections |
|
Inputs: | 2 x Phoenix 3 pin (balanced, can be unbalanced) |
Outputs: | 12 x Phoenix 3 pin (balanced, can be unbalanced) |
Mains Input: | Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max |
Fuse Rating: | Anti-surge fuse 100mA 20 x 5mm (230VAC) Anti-surge fuse 250mA 20 x 5mm (115VAC) |
Equipment Type |
|
RB-DA6P: | 6 way stereo distribution amplifier with Phoenix connectors |
Physical Specification |
|
Dimensions (Raw): | 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) 19” (W) x 4.3” (D) x 1.7” (H) (1U) |
Dimensions (Boxed): | 53cm (W) x 20.5cm (D) x 6cm (H) 21” (W) x 8” (D) x 2.4” (H) |
Weight: | Nett: 1.3kg Gross: 1.9kg Nett: 2.9lbs Gross: 4.2lbs |