ATI Audio DDA106-XLR Series 2 Two-Input 1X6 Digital Audio DA, up to 192kHz SR, XLR I/O

ATI Audio DDA106-XLR Series 2 Two-Input 1X6 Digital Audio DA, up to 192kHz SR, XLR I/O 

The DDA-106 series 2 units are having two inputs that are selectable from on front-panel switch. The selected input feeds AES audio to 6-separate outputs. A front panel switch chooses either re-clocking or non-re-clocking of the input signal. In many cases, re-clocking is preferred, as this feature enhances the integrity distorted input signals. Also, you can switch off the re-clocking to permit the distribution of AES sync signals, Dolby E encoded AES signals, or other signals that should not be re-clocked. 

Features 

• Accepts sample rates from 27 to 192kHz 
• Loop thru transformer balanced and isolated inputs 
• Two front-panel-selectable inputs 
• Six outputs 
• Attractive and rugged 1RU package 

ATI Audio DDA106-XLR Specs  

Input 

• Connectors:XLR female or BNC; paralleled input connectors for loop-thru expansion 
• Impedance: Transformer isolated, balanced and floating, XLR 110 ohms, BNC 75 ohms; terminating resistors may be switched in or out via front panel control 
• Sampling Frequency: 27 to 192kHz 
• Cable Length: > 1000 feet (300 meters) of 110 ohm cable with equalizer; 75 ohm coax allows longer runs 
• Equalizer: Automatic EQ for long lines via front panel push button 

Clock  

Regenerated from input signal with dual mode PLL or non-reclocked to preserve Surround coding, switchable 

Outputs 

• Connectors:XLR Male or BNC Female, 6 or 12 depending on model 
• Level:XLR 4Vp-p loaded; BNC 2Vp-p loaded 
• Output Jitter:< 300 picoseconds peak to peak. d 

Indicators 

• Input Fault: (DDA-212 Only) Input 1, Input 2; identifies input with error condition 
• Input Termination: On, Off 
• Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz 
• Input Word Length: 16, 18, 20 and 24 bits 
• Input Digital Errors: 16, 18, 20 and 24 bits 
• Power: Internal Supply, 115/230VAC (selectable via internal jumper) ±10%, 50/60Hz, 10VA, IEC320 3 pin connector 
• Shipping Size: 20.5” W x 4“H x 11”D; 7.2 lbs.