ATI Audio DDA208-XLRSeries 2 Two-Input 1x8 Digital Audio DA, up to 192 kHz SR, Switchable Re-clocking, XLR I/O

Vendor: ATI
ATI Audio DDA208-XLRSeries 2 Two-Input 1x8 Digital Audio DA, up to 192 kHz SR, Switchable Re-clocking, XLR I/O The ATI DDA208 Series 2 inputs feed AES audio to 8-separate outputs. Internal jumpers can...
$1,899.00
Title

ATI Audio DDA208-XLRSeries 2 Two-Input 1x8 Digital Audio DA, up to 192 kHz SR, Switchable Re-clocking, XLR I/O

The ATI DDA208 Series 2 inputs feed AES audio to 8-separate outputs. Internal jumpers can either select re-clocking or non-re-clocking of the input signal. In many cases, re- clocking is preferred, as this feature enhances the integrity of distorted input signals. Re-clocking may be switched-off to permit the distribution of AES sync signals, or other signals that should not be re- clocked. 

 The ATI DDA208 Series 2 units work with AES signals that consists sample rates from 27 through 192kHz and 16-bit through 24-bit density, hence allowing very high-resolution signals to get distributed.  

  • Accepts sample rates from 27 to 192kHz
  • Switchable re-clocking regenerates stable data before distribution
  • Loop thru transformer balanced and isolated inputs
  • Switchable input termination
  • Individual, transformer balanced and isolated 110-ohm XLR outputs (XLR only)
  • Individual isolated 75-ohm BNC outputs (BNC only)
  • Eight outputs
  • Quiet, internal power supply
  • AC Input 100-250 VAC 50/60 Hz, 25W Maximum
  • Attractive and rugged 1RU package

 DA208 Specifications

  • Output Level: +24dBm into 600 ohm balanced loads
  • THD: .001% typical, 20Hz to 20kHz
  • IMD: .05% maximum, SMPTE measurement
  • Slew Rate: 13 Volts per microsecond
  • Response: +/-. 25dB, 30Hz to 20kHz
  • Noise: -100dBm EIN 20Hz to 20kHz
  • Gain: 20dB maximum; each output has 40dB smooth adjustment range going to full off
  • Crosstalk: 70dB minimum at 1kHz
  • Output Impedance: 400 ohms balanced, 200 ohms single-ended, split and RF bypassed, AC coupled
  • Input: 30K ohm active balanced, split and RF bypassed; +22dBm maximum input level
  • Hum Rejection: 70dB CMR at 60Hz
  • Power: 115/230 VAC +10%, 47-63Hz, 12 VA
  • Size: 19" (48.3cm) W x 1-3/4" (4.4cm) H x 7-1/2" (19.1cm) D
  • Shipping Weight: 5 pounds (2.3kg)
  • Terminals: Euro style modular connectors