Radial SB-5W Wall DI Wall-mount stereo DI, Passive, Fits in Single Gang Receptacle
Vendor: Radial
Available
Radial StageBug SB-5W Wall DI Wall-mount stereo DI, Passive, Fits in Single Gang Receptacle
Passive Wall-mountable Stereo Direct Box
The Radial StageBug SB-5W a passive stereo direct box professionally created to fit in a standard North American single-gang electrical wall plate, capable to provide AV integrators with an efficient way to connect an unbalanced audio source such as tablet, laptop, or smartphone to a balanced audio system.
The Radial StageBug SB-5W is a passive stereo direct box professionally designed to integrate the consumer audio devices such as tablets, smartphone and laptops to a professional audio system. It is designed to fit in a standard Decora wall plate, this Radial StageBug SB-5W comes with a integral design capable of protecting itself against external radiation because it is created completely shielded. The Radial StageBug SB-5W is a passive device, capable of presenting excellent performance, at the same time it provides isolation for eliminating the hum and buzz made by ground loops.
Professional sound for installation
The StageBug SB5W provides a permanently mounted interface to connect consumer audio devices with installed pro audio systems. Front panel 3.5mm TRS and RCA connectors are provided for any stereo source and a fully variable level control makes volume adjustments easy. Inside, the SB5W employs dual transformers that convert the inputs to a low impedance balanced signal, and eliminate hum and buzz caused by ground loops. Set & forget ground lift and mono switches are also included to further reduce noise and to sum the left and right channels together if needed. The outputs of the SB5W feature screw terminals with tie down points for tie-wraps to make installation fast, efficient and permanent.
Features
- 5mm and RCA inputs with level control
- Passive design, no power needed
- Contractor-friendly screw terminal outputs
- Transformer isolation to eliminate noise
Specifications | ||
---|---|---|
Audio circuit type: | Passive transformer isolated | |
Frequency response: | 20Hz - 20kHz | |
Dynamic range: | >120dB | |
Gain: | -3dB | |
Clip Level: | +17dBu | |
Total harmonic distortion: | 0.002% | |
Phase Deviation: | 0° @ 100Hz; -3° @ 50Hz | |
Input Impedance: | Approx 10K with 100K Load | |
Output Impedance: | 5k Ohms | |
Equivalent Input Noise: | -98dBu | |
Noise: | -101dBu | |
Maximum Input: | +20dBu | |
Features | ||
Mono Sum, Ground lift | ||
Input Connectors: | RCA, 3.5mm TRS inputs | |
Output Connectors: | Screw down terminals (- G +) | |
General | ||
Construction: | 14 gauge steel chassis & outer shell | |
Size (L x W x D): | 2.42" x 1,62" x 4.24" (61.4mm x 41.1mm x 107.7mm) | |
Weight: | 0.5 lbs (227 grams) | |
Shipping size (L x W x D): | 6.25" x 4.25" x 3" (159mm x 108mm x 76mm) | |
Shipping weight: | 0.65 lbs (295 grams) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |