Radial SB-5W Wall DI Wall-mount stereo DI, Passive, Fits in Single Gang Receptacle

Vendor: Radial
Description Radial StageBug SB-5W Wall DI Wall-mount stereo DI, Passive, Fits in Single Gang Receptacle Passive Wall-mountable Stereo Direct Box The Radial StageBug SB-5W a passive stereo direct box professionally created to fit in...
$159.99 $199.00
Title

Radial StageBug SB-5W Wall DI Wall-mount stereo DI, Passive, Fits in Single Gang Receptacle

Passive Wall-mountable Stereo Direct Box

The Radial StageBug SB-5W a passive stereo direct box professionally created to fit in a standard North American single-gang electrical wall plate, capable to provide AV integrators with an efficient way to connect an unbalanced audio source such as tablet, laptop, or smartphone to a balanced audio system.

The Radial StageBug SB-5W is a passive stereo direct box professionally designed to integrate the consumer audio devices such as tablets, smartphone and laptops to a professional audio system. It is designed to fit in a standard Decora wall plate, this Radial StageBug SB-5W comes with a integral design capable of protecting itself against external radiation because it is created completely shielded. The Radial StageBug SB-5W is a passive device, capable of presenting excellent performance, at the same time it provides isolation for eliminating the hum and buzz made by ground loops.

Professional sound for installation

The StageBug SB5W provides a permanently mounted interface to connect consumer audio devices with installed pro audio systems. Front panel 3.5mm TRS and RCA connectors are provided for any stereo source and a fully variable level control makes volume adjustments easy. Inside, the SB5W employs dual transformers that convert the inputs to a low impedance balanced signal, and eliminate hum and buzz caused by ground loops. Set & forget ground lift and mono switches are also included to further reduce noise and to sum the left and right channels together if needed. The outputs of the SB5W feature screw terminals with tie down points for tie-wraps to make installation fast, efficient and permanent.

Features

  • 5mm and RCA inputs with level control
  • Passive design, no power needed
  • Contractor-friendly screw terminal outputs
  • Transformer isolation to eliminate noise
Specifications
Audio circuit type: Passive transformer isolated
Frequency response: 20Hz - 20kHz
Dynamic range: >120dB
Gain: -3dB
Clip Level: +17dBu
Total harmonic distortion: 0.002%
Phase Deviation: 0° @ 100Hz; -3° @ 50Hz
Input Impedance: Approx 10K with 100K Load
Output Impedance: 5k Ohms
Equivalent Input Noise: -98dBu
Noise: -101dBu
Maximum Input: +20dBu
Features
Mono Sum, Ground lift
Input Connectors: RCA, 3.5mm TRS inputs
Output Connectors: Screw down terminals (- G +)
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 2.42" x 1,62" x 4.24" (61.4mm x 41.1mm x 107.7mm)
Weight: 0.5 lbs (227 grams)
Shipping size (L x W x D): 6.25" x 4.25" x 3" (159mm x 108mm x 76mm)
Shipping weight: 0.65 lbs (295 grams)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable