ATI Audio DDA212-XLR Series 2 Two-Input 1X12 or Dual 1X6 Digital Audio DA, up to 192kHz SR, Switchable Re-clocking, XLR I/O

ATI Audio DDA212-XLR Series 2 Two-Input 1X12 or Dual 1X6 Digital Audio DA, up to 192kHz SR, Switchable Re-clocking, XLR I/O

The DDA-212XLR designed by ATI is a dual 1X6 Digital Audio DA, up to 192 kHz SR, switchable re-clocking, XLR I/O 192 kHz digital distribution amplifier. Internal dual 1x6 distribution amplifiers permit the unit to operate as two individual distribution amplifiers, one for receiving signal from independent sources and other for sending the signal to independent zones.

• Dual 1 x 6 Signal Distribution: The unit features dual 1 x 6 distribution amplifiers. This allows signal distribution of AES/EBU digital audio from dual independent sources.
• 110-Ohm XLR Connectors: Transformer-balanced 110-Ohm XLR connectors are provided on inputs and outputs.
• Accurate Regeneration: The DDA-212XLR will support and accurately regenerate digital audio from 27 to 96 kHz.

ATI Audio Inc DDA212-XLR Specs

• Input Connectors: Balanced XLR Female, Paralleled Input Connectors for Loop-Thru Expansion
• Input Level: 200 mV p-p Minimum
• Input Impedance: 2Transformer Isolated, Balanced and Floating XLR Inputs 110 Ohms
• Sampling Rate: 27 to 96 kHz
• Maximum Cable Length: > 300 m of 110-Ohm Cable with Equalizer Allows Longer Runs
• Clock: With Re-clocking on, Regenerated from Input Signal; Clock Jitter < 300 Picoseconds Peak-to-Peak at 96 kHz Sample Rate With Re-clocking Off, Input Clock Is Passed Directly to Outputs
• Clock Jitter: 3 Nanoseconds Peak-to-Peak
• Output Connectors: 12 x XLR Male Chassis Mount
• Output Level: XLR, 4 V p-p Loaded at 110 Ohms
• Impedance: Balanced XLR 110 Ohms
• Output Jitter: 300 Picoseconds Peak-to-Peak at 96 kHz Sample Rate
• Propagation Delay: 25 Nanoseconds
• Power: Internal, 115/230 VAC ±10%, 50/60 Hz, 10 VA. IEC 320 3-Pin Connector
• Dimensions: 19.00 x 1.75 x 8.50" / 48.26 x 4.45 x 21.59 cm
• Weight: 7.00 lb / 3.18 kg