DBX 2 Series - Single 31 Band Graphic Equalizer 131s

DBX 2 Series - Single 31 Band Graphic Equalizer 131s

The 131s designed from dbx is a single channel, 31 band, 1/3 octave graphic equalizer housed in a single space, rack mount chassis. The processor is equally suitable for audio installations, live applications, and for use in a studio.

The unit features 20mm non-conductive sliders that can be set to either +/-6dB or +/-12dB of boost or cut. A global control gives +/-12 dB of input gain. A 12dB per octave, 3dB down at 50Hz low-cut filter can also be switched in if needed.

The 131s offers exceptional sound and rugged reliability from its extended frequency response and excellent dynamic range, to the quality components and meticulous attention to detail.

• Single, 31-band, 1/3-octave constant Q graphic EQ
• Switchable boost/cut ranges of +/-6 or +/-12dB
• 20mm non-conductive sliders
• 12dB per octave, 3dB down at 50Hz low-cut filter
• +/-12 dB input gain range
• Front panel bypass switch
• 4-segment LED ladders for monitoring output levels
• XLR and 1/4" TRS inputs and outputs

Dbx 131s Specs

• Filter Type: Graphic, constant Q
• Number of Channels: Single
• Frequency Bands: 31
• Bandwidth: 1/3-octave
• Range (Boost/Cut): +/-6 dB or +/-12 dB, switchable
• Inputs: 1 x XLR (pin 2 hot)
  1 x 1/4" TRS phone
• Input Impedance: 40 kΩ balanced, 20 kΩ unbalanced
• Maximum Input Level: >+21dBu balanced or unbalanced
• Outputs: 1 x XLR (pin 2 hot)
  1 x 1/4" TRS phone
• Output Impedance: 100Ω balanced, 50Ω unbalanced
• Maximum Output Level: >+21dBu balanced/unbalanced into 2kΩ or greater
  >+18dBm balanced/unbalanced into 600Ω
• Frequency Response: FR: <10Hz to >50kHz, +0.5/-3.0dB
  Bandwidth: 20Hz to 20kHz, +0.5/-1.0dB
• Dynamic Range: >112 dB typical
• Noise: SNR: >95dB typical
• THD + N: <0.003%
• Crosstalk: <-90dB, 20Hz to 20kHz
• CMRR: >40dB, typically >55dB @ 1kHz
• Switches: EQ Bypass - bypasses the graphic equalizer section in the signal path
  Low Cut - activates the 50Hz 12dB/octave high-pass filter
  Range - selects either +/- 6dB or +/-12dB slider boost/cut range
• Power Requirements: 100~240VAC 50/60Hz
  15W power consumption
• Dimensions (WxHxD): 19 x 6 x 1.75" (483 x 152 x 45 mm)
• Weight: 4.8 lb (2.2 kg)
• Specialties: 20 mm non-conductive sliders

Packaging Info

• Package Weight: 6.05 lb
• Box Dimensions (LxWxH): 21.9 x 11.3 x 2.5"