Dynacord C2800FDI-US, DSP 2 x 1400 w power amplifier for fixed install applications

Vendor: Dynacord
Dynacord C2800FDI-US, DSP 2 x 1400 w power amplifier for fixed install applications Dynacord C2800FDI-US C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Besides low impedance operation (2 Ohms,...
$1,459.00
Title

Dynacord C2800FDI-US, DSP 2 x 1400 w power amplifier for fixed install applications

Dynacord C2800FDI-US C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Besides low impedance operation (2 Ohms, 4 Ohms, or 8 Ohms) C2800FDi can drive 70 V loudspeaker lines directly without output transformers. Integrated digital signal processing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilizes Class A/B resp. Class H topologies, which provide market-leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For a low cost of ownership, a power-saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control, and comprehensive supervision.

Dynacord C2800FDI-US Main Features

  • Professional DSP amplifier for live and mobile application
  • Fully integrated professional speaker processing with FIR drive technology
  • Market-leading acoustic performance and rock-solid reliability
  • Intuitive, simplified set-up, control, and operation in SONICUE sound system software with firmware 2.0

    Load Impedance 2 Ω 2.7 Ω 4 Ω 8 Ω
    Maximum Output Power, Single Channel  2300 W 2000 W 1400 W 700 W
    Maximum Output Power, Dual Channel  2200 W 1800 W 1300 W 650 W
    Maximum Output Power, Bridged  - - 4400 W 2600 W
    Direct Drive
    Load Capability
    Dual-Channel Bridged
     70 V Operation
     2 x 1250 W (0.0 dB)
     Not recommended1
    100 V Operation
    2 x 1250 W (-3.0 dB)
    1 x 1250 W (0.0 dB)
    Maximum RMS Voltage Swing THD = 1%, 1 kHz 78.8 V
    Voltage Gain Ref.1 kHz 32.0 dB
    THD at 900 W/4 Ω MBW = 80 kHz, 1kHz < 0.05%
    IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
    DIM30,3.15 kHz, 15 kHz < 0.05%
    Maximum Input Level +21 dBu
    Crosstalk ref. 1 kHz, at 100W/4 Ω < -80 dB
    Frequency Response, ref. 1 kHz 10 Hz to 21 kHz (±1 dB)
    Input Impedance, Active Balanced 20 k Ω
    Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω >107 dB
    Output Noise, A-weighted < -68 dBu
    Output Stage Topology Class H
    Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
    Power Consumption ⅛ Maximum Output Power @ 4 Ω 700 W
    Mains Fuse 240 V/230 V: T15AH; 120 V/100 V: T25AH
    Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
    Cooling Front-to-rear, 3-stage-fans
    Ambient Temperature Limits +5°C to +40°C (40°F to +105°F)
    Safety Class I
    Color Black
    Weight 16.2 kg (35.7 lb)
    Remote Power ON/GPIO Power remote via a switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
    Signal Processing FIR filters, audio limiters, output, and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, the load impedance
    Remote Control SONICUE sound system software **
    Accessories RMK15 (rear rack mount kit)