Neumann TLM 107 (Nickel) / Neumann TLM 107 BK (Black) Multi-pattern Microphone
Vendor: Neumann
Available
Neumann TLM 107 (Nickel) / Neumann TLM 107 BK (Black) Multi-pattern mic delivering balanced sound for all five directional characteristics: omnidirectional, cardioid and figure-8, with the intermediate patterns wide-angle cardioid and hypercardioid
The Neumann TLM 107 comes in Nickel color and, Neumann TLM 107 BK in Black color. It is a high-quality, flexible large diaphragm condenser microphone that is professionally designed along with five selectable polar patterns that is built capable of accommodating a wide variety of professional studio, broadcast and demanding home recording applications.
The Neumann TLM 107 is carefully engineered with a transformerless design that is permitting a high degree of linearity and a large dynamic range. This comes featuring the selectable omnidirectional wide angle cardioid, cardioid, hypercardioid and figure-8 polar patterns, this microphone is made suitable for a wide range of miking techniques and configurations.
The mic also comes featuring -6dB and -12dB pads that is capable to be engaged for recording louder sound sources such as brass or guitar amplifiers. Additionally, it comes with a selectable high-pass filters at both 40 Hz and 100 Hz for filtering out unwanted low frequencies for saving your time when mixing.
- Low self-noise of 10 dB-A
- Maximum sound pressure level of 141 dB SPL, can be increased to 153 dB SPL with pad
- Low cut and pad are controlled via navigation
- Pad and low cut status displayed by LED
- Illuminated polar pattern display
- Indicator light displays are turned off automatically after 15 seconds
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Cardioid, Figure-8, Hypercardioid, Omnidirectional, Wide-Angle Cardioid |
Pattern Selection | Switched |
Pad | -6 dB -12 dB |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 141 dB SPL |
Impedance | 50 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 11 mV/Pa at 1 kHz into 1 Kilohms |
Signal-to-Noise Ratio | 72 dB CCIR 84 dB A-Weighted |
Equivalent Noise Level | 22 dB CCIR 10 dB A-Weighted |
THD | < 0.5% |
Output Connectors | 1 x XLR 3-Pin |
Operating Voltage | 48 V ± 4 V |
Operating Current Consumption | 3.2 mA |
Dimensions | ø: 2.52 x L: 5.71" / ø: 64 x L: 145 mm |
Weight | 15.7 oz / 445 g |