QSC AD-S10T 10" Two-way Surface Speaker
QSC AD-S10T 10" Two-way surface speaker, 70/100V transformer with 8Ω bypass, 90° conical DMT™ coverage, (Black or White) (PER PAIR)
The QSC AcousticDesign™ AD-S10T is a 10" 2-way surface mounted 70/100V loudspeaker system with a 90° conical DMT™ coverage, well suited for a wide
variety of background and foreground sound reinforcement applications.
The AcousticDesign Series is offering the integrators a premium quality installed sound solution where aesthetics, performance and consistent coverage are paramount. Designed specifically for maintaining a consistent tonal
characteristic across the entire family in pendant, ceiling and surface enclosures, the AcousticDesign Series allowing integrators seamless transitions within blended installations.
The QSC AD-S10T is featuring a high quality 10” weather treated paper cone woofer on a 2.5” voice coil. A carefully selected 1” exit, 1.4” compression driver perfectly matches the performance and sensitivity of the woofer for outstanding full-range reproduction.
Through the use of DMT™ (Directivity Matched Transition) the even and consistent 90° axisymmetric (conical) coverage is achieved, a QSC innovation which matches the the high-frequency waveguide at the crossover point and directivity patterns of the woofer. The result is a coherent transition
between improved off-axis response and transducers.
The even, accurate frequency response of the AD-S10T is aided by a 100-watt low-loss, low-saturation transformer with selectable taps, including an 8Ω bypass. To enhance weather resistance, the rotary selector is located on the back of the enclosure, protected by a weather grommet. With rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles for weather resistance, the AcousticDesign™ surface mounted series exceed IEC60529 IP-54 ratings for dust and splash resistance.
|Frequency Range||50 Hz to 19 kHz|
|Noise Power||250 W / 45 V (rms)|
|Sensitivity||92 dB SPL|
|Coverage Angle||(-6 db): 90°|
|Directivity Index||10 dB|
|Maximum Sound Pressure Level (SPL)||Continuous: 116 dB
Peak: 122 dB
|Recommended Amp Power||500 W|
|Transformer Taps||70 V: 100, 50, 25, 12.5 W and 8 Ω bypass
100 V: 100, 50, 25 W and 8Ω
|High Frequency Transducer||1" exit / 1.4" voice coil compression driver|
|Low Frequency Transducer||10" weather resistant paper cone woofer|
|Input Connector||Euroblock connector with parallel output terminals|
|Weight||31.0 lb (14.1 kg)|
|Dimensions||20.3 x 12.5 x 11.7" (51.6 x 31.8 x 29.8 cm)|