Radial McBoost Mic signal booster, class-A fet with 25dB gain, load adjust and filter

Vendor: Radial
Description Radial McBoost Mic signal booster, class-A fet with 25dB gain, load adjust and filter Microphone Signal Intensifier The Radial McBoost is a microphone signal booster that is professionally designed for elevating the output of a dynamic...
$229.99 $289.00
Title

Radial McBoost Mic signal booster, class-A fet with 25dB gain, load adjust and filter

Microphone Signal Intensifier

The Radial McBoost is a microphone signal booster that is professionally designed for elevating the output of a dynamic or ribbon microphone for greater clarity and transparency, and for providing enough clean gain for connecting to any preamp.

Boost your signal at the source

The Radial McBoost is capable of providing a clean gain at the source for low-output dynamic and ribbon microphones, to drive long cable runs with ease and to allow the user to connect to any preamp as if it were a high-gain ribbon mic pre. Simply connect the Radial McBoost in-line with the use of the standard XLR cables and activate 48V phantom for providing the power, then select between three impedance settings for optimizing the response from the microphone. The Radial McBoost will elevate the output for producing added clarity, excitement and extra drive for long cables whether the user are in a live concert stage, in a broadcast center, or in recording studio.

Features

  • 26dB signal booster for dynamic & ribbon microphones
  • Class-A dual transistor circuit for transparent operation
  • Powered by 48V phantom power
  • Three-position impedance selector & variable gain
Specifications
Audio circuit type: Class-A Differential DC Coupled FET
Frequency response: <7Hz to >30kHz
Dynamic range: 116dB
Gain: +26dB Full Gain, +20dB Half Gain, +4dB to +25dB Variable Gain
Clip Level: +16dBu (output)
Total harmonic distortion: 0.006%
Intermodulation Distortion: 0.01%
Phase Deviation: <10°
Input Impedance: 600Ω / 2.7kΩ / 30kΩ
Output Impedance: 220Ω
Common Mode Rejection Ratio: >50dB
Equivalent Input Noise: -125dBu
Noise: -100dBu / -110dBu
Features
Input Connectors: XLR female output
Output Connectors: XLR male output
General
Construction: Cold Rolled Steel
Power: Phantom Power - 48V
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable