Radial OX8-j 8 channel mic splitter, Jensen isolation transformers, D-subs & XLRs
Vendor: Radial
Available
Radial OX8-j 8 channel mic splitter, Jensen isolation transformers, D-subs & XLRs
Rackmount Mic-Level Passive Splitter
The Radial OX8-j an 8-channel passive microphone splitter that is professionally designed capable of sending the output of multiple microphones to three destinations at simultaneously, with ground lifts and transformer isolation for the elimination of hum and buzz caused by ground loops. The passive design is making a microphone enable to feed two or even three consoles simultaneously. The transformer coupled output is providing isolation for the elimination of DC from travelling between mixers, that's to reduce the noise from the ground loops. The result is exceptionally low noise in even the most stressful-to-handle environments. The Radial OX8-j is the Jensen transformer choice and there's another one also, anyone can do the choice based on the requirements of the performance and the budget. The rest of the features are identical.
Noise-free microphone splitting
The Radial OX8 is a professional audio tool that is equally at home on a live stage as it is in a broadcast studio, splitting eight microphone signals to multiple destinations simultaneously without noise or distortion, and eliminating hum and buzz from ground loops. Each channel is configured with a balanced input, a direct out which also serves as a return path for 48V phantom power, a thru-put with a ground lift switch, and a fully transformer-isolated output. The OX8 may be ordered with premium Jensen JT-MB-CPC transformers or Eclipse ET-MS10 transformers as an affordable alternative. Each channel also benefits from an ultra-short signal path and built in RF filters to ensure absolute quiet performance even in the most noise-prone environments.
Features
- Balanced 8-channel microphone signal splitter
- Delivers high quality audio without distortion
- Choice of Eclipse or premium Jensen transformers
- Eliminates hum and buzz caused by ground loops
Specifications | ||
---|---|---|
Audio circuit type: | Passive transformer based mic level splitter | |
Transformer: | choice of Jensen JT-MB-CPC or Radial Eclipse MS10 | |
Number of channels: | 8 | |
Frequency response: | Jensen 20Hz ~ 20KHz (+0dB/-0.2dB) | Radial 20Hz ~ 18KHz (+0dB/-3dB) | |
Dynamic range: | Jensen 140dB | Radial 140dB | |
Total harmonic distortion: | Jensen 0.003% @ 1kHz | Radial 0.005% @ 1kHz | |
Phase Deviation: | Jensen 0.7° @ 100Hz; 2.8° @ 20Hz | Radial 1° @ 100Hz; 5° @ 20Hz | |
Input Impedance: | 150 Ohms, balanced | |
Output Impedance: | 150 Ohms, balanced | |
Common Mode Rejection Ratio: | Jensen -115dB @ 60Hz | Radial 114dB @ 60Hz | |
Maximum Input: | Jensen +2dBu @ 20Hz | Radial +2dBu @ 20Hz | |
Features | ||
Input pad, Ground lift | ||
Input Connectors: | XLR, Euroblock, DB-25 | |
Output Connectors: | Euroblock, DB-25 | |
General | ||
Construction: | 14-gauge steel | |
Size (L x W x D): | 19" x 6" x 1.75" (48.25cm x 15.25cm x 4.45cm) | |
Weight: | 7.5lb (3.4 kg) | |
Shipping size (L x W x D): | 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm) | |
Shipping weight: | 8lb (3.63kg) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |