Radial Reamp JCR Passive John Cuniberti Reamper with level control & filter
Vendor: Radial
Available

Radial Reamp JCR Passive John Cuniberti Reamper with level control & filter
Original Reamp Circuit
The Radial Reamp JCR is a high-performance passive Reamper designed professionally for giving the user the ability for taking a pre-recorded track and send it using a guitar amp or pedal chain, that allows the user to explore new sonic texture and experiment alongside microphone placement, pedal and amp settings with no limit. The Reamp® JCR is equipped with the original Reamp circuit that is designed by recording industry legend John Cuniberti, that provides an unique audio quality that is preserving every detail of the original recording and optimizing it for feeding amplifiers and effect pedals, at the same time.
The Radial Reamp JCR is the up to date rendition of the original Ream V.2 that was developed by John Cuniberti. Careful attention has been given for ensuring the performance and sound to be faithful still to the original. The hear of the beast is a custom made audio transformer capable to unbalance the signal and for shifting the impedance. Of course, its key specifications are the frequency curve and phase response. We have also provided a comparison between this new Radial JCR and the original Reamp for your reference.
Play now, perfect later
The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.
Features
- Lets you re-record tracks through a guitar or bass amp
- Original Reamp® circuit designed by John Cuniberti
- Plug and play easy to use passive design
- Improves productivity while expanding creative options
Specifications | ||
---|---|---|
Audio circuit type: | Passive, transformer isolated | |
Frequency response: | 20Hz ~ 20kHz (+0dB/-1dB) | |
Dynamic range: | 140dB | |
Total harmonic distortion: | 0.001% @ 1kHz/0dBu input | |
Intermodulation Distortion: | 0.0025% @ 1kHz/-10dB input | |
Phase Deviation: | 2º @ 100Hz; 0º @ 800Hz | |
Input Impedance: | 1800 Ohms | |
Output Impedance: | 4.8k Ohms | |
Common Mode Rejection Ratio: | -55dB @ 55Hz | |
Noise: | -115dBu | |
Maximum Input: | +26dBu | |
Features | ||
180° polarity reverse, Ground lift, HPF, LPF, Level Control | ||
Input Connectors: | 1/4" TRS, XLR | |
Output Connectors: | 1/4" unbalanced | |
General | ||
Construction: | 14-gauge steel chassis & outer shell | |
Size (L x W x D): | 3.3" x 5.0" x 2" (84 x 127 x 48mm) | |
Weight: | 1.32lb (600g) | |
Shipping size (L x W x D): | 4" x 3" x 6.5" (102 x 76 x 165mm) | |
Shipping weight: | 1.85lb (840g) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |