Radial SAT2 Line level stereo attenuator, passive, TRS & XLR inputs, XLR outs
Vendor: Radial
Available

Radial SAT2 Line level stereo attenuator, passive, TRS & XLR inputs, XLR outs
Stereo Audio Attenuator & Monitor Controller
The Radial SAT2 is a passive stereo audio device that is designed for providing the user with a transparent level control at any time you may need it, either at the output of a pair of high-gain mic preamps, or between your recording interface and a pair of powered speakers as a compact desktop monitor controller.
Ultra-quiet monitor controller
During the time of use of the Radial SAT2 as a monitor controller, simply connect the Radial SAT2 in between your playback device and a pair of powered speakers for an easy-access master volume control. Mute and mono switches are allowing the user to silence the outputs or check mixes for mono phase compatibility, and a handy din switch with with adjustable level control, at the same time, that is allowing the user to temporarily lower the output volume without losing the main volume setting.
Attenuation in the studio
The SAT-2 can also be used to attenuate signals before sending them to your audio interface, so you can drive your mic preamps hard for coloration without clipping the inputs of the digital audio converter. A high quality 4-pole rotary knob ensures consistent L-R tracking over the entire range of the trim pot, fully maintaining the left-right balance of stereo sources.
Features
- Level control for a pair of powered speakers
- Attenuates hot signal levels to prevent clipping
- Passive audio circuit, no power required
- Transparent operation without signal coloration
Specifications | ||
---|---|---|
Audio circuit type: | Passive audio signal path | |
Number of channels: | 2 | |
Frequency response: | 20Hz to 20kHz | |
Dynamic range: | >141dB | |
Gain: | 0dB | |
Total harmonic distortion: | >0.0005% @ 0dBu | |
Intermodulation Distortion: | >0.001% @ 0dBu | |
Phase Deviation: | 0° @ 20Hz, 0° @ 1kHz, +2° @10kHz | |
Input Impedance: | 8 kΩ | |
Output Impedance: | 1.8 kΩ | |
Common Mode Rejection Ratio: | >80dB | |
Noise: | -115dBu | |
Maximum Input: | >+ 26dBu | |
Features | ||
Mono Sum, Level Control | ||
Input Connectors: | XLR, 1/4" | |
Output Connectors: | XLR | |
General | ||
Construction: | 14-gauge steel chassis and outer shell | |
Size (L x W x D): | 5" x 3.25" x 2" (12.7 x 8.3 x 5cm) | |
Weight: | 1.5lb (0.68kg) | |
Shipping size (L x W x D): | 6.4" x 4.25" x 3" (16.3 x 10.8 x 7.6cm) | |
Shipping weight: | 1.8lb (0.8kg) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |