RCF TT25-CXA Active 15" Coaxial Lay Low Stage Monitor 1100 Watts
Vendor: RCF
Available

RCF TT25-CXA Active 15" Coaxial Lay Low Stage Monitor 1100 Watts
The black RCF TT25-CXA is a professionally designed 15" Active High-Definition Coaxial Monitor Speaker that comes along with RCF is created as a full-range, sound-reinforcement speaker that comes featuring a coaxial 15” woofer driver and a 64mm-diaphragm compression driver that comes along with phase-corrected control electronics, and amplification. Its horn on a coaxial transducer is made exhibiting a constant Q. The frequency response is madeuniform across the specified beam width, along with minimal side lobes. The HF transducer is created as a high-performance 2.5”-diaphragm compression driver that comes along with a 1.5” exit throat which features several state-of-the-art technologies.
The monitor/speaker comes featuring two independent digital amplifiers that comes along with 800W for low frequencies and 300W for the high-frequency driver. The Class-D amplifiers are made offering a hi-fi sound, extremely low distortion that comes along with negligible quiescent noise, and stable burst response. It comes equipped along with a state-of-the-art input board which comes featuring an XLR input/output, a rotating encoder intended for having a gain reduction, speaker presets, time delay, RDNet input/output, 4 status LEDs, and Powercon input/output.
The TT25- CXA comes featuring 96 kHz/32-bit DSP processing and a networking board. It comes along with each cabinet having its own DSP, it is possible to address (to single cabinets or groups of cabinets) specific presets or modifications of parameters like gain, equalization, or delay. The RDNet protocol is based on RS-485 communication protocol. It is very stable and is able to send and receive data on a simple XLR cable.
The TT+ two-way systems features a multifunctional rear encoder to easily control all the speaker functions (gain reduction, delay, speaker presets), even without network connection. The cabinets feature an aluminum top handle and a side pole mount for easy mobility.
- 1100W Class-D amplifier
- 133 dB maximum SPL
- Wide dispersion, 60 x 60° low distortion, and constant-directivity horn
- 15" neo-coaxial woofer, 3.5"mm voice coil
- 1.5" neo-coaxial compression driver, 2.5"mm voice coil
- DSP processing
- On-board RDNet control
- Multifunctional cabinet
- High output
Main Applications
Main vocal stage monitor, high-output drum or keyboard monitor, side-fill monitor for small- to medium-scale applications
Frequency Response | -3 dB: 50 Hz to 20 kHz |
Maximum SPL | 133 |
Angle | Horizontal: 60° Vertical: 60° |
Compression Driver | 1.5", 2.5" voice coil |
Woofer | 15", 3.5" voice coil |
Input Signal | Balanced/unbalanced |
Input Connectors | XLR, RDNet on-board |
Input Sensitivity | -2 dBu / + 4 dBu |
Crossover Frequencies | 900 Hz |
Protections | Thermal, HF |
Limiter | Soft limiter, dynamic |
Total Power | 1100 W RMS |
Frequencies | High: 300 W RMS Low: 800 W RMS |
Cooling | Convection |
Connection | Powercon input/output |
Material | Baltic birch plywood |
Handles | 2 side |
Pole Mount/Cap | Yes |
Dimensions (H x W x D) | 14.0 x 23.0 x 19.2" (35.5 x 58.4 x 49.0 cm) |
Weight | 40 lb (18 kg) |