Shure MX202B/C Cardioid Black Mini-Condenser for Overhead Miking, 30 Cable, In-Line Preamp with XLR Microphone Stand Adapter

Vendor: Shure
Shure MX202B/C Cardioid Black Mini-Condenser for Overhead Miking, 30 Cable, In-Line Preamp with XLR Microphone Stand Adapter The MX202BC Microphone by Shure is small, unobtrusive and is designed to overhead mount in worship houses, theater...
$196.00 $255.00
Title

Shure MX202B/C Cardioid Black Mini-Condenser for Overhead Miking, 30 Cable, In-Line Preamp with XLR Microphone Stand Adapter

The MX202BC Microphone by Shure is small, unobtrusive and is designed to overhead mount in worship houses, theater stages, lecture halls and more. The microphone is included a stand adapter and is available in black and white finishes. The Microflex Overhead condenser microphones are delivering high quality sound in a compact and adjustable design.

Each model is featured with one of the three interchangeable condenser microphone cartridges attached to a flexible and four inch gooseneck along with a 30 foot cable. The microphone is responsible for sound reproduction with minimal RF interference or electromagnetic hum.

The new Microflex Overheads are featured with interchangeable cardioid, supercardioid and omnidirectional condenser cartridges that get fitted in every model in the Microflex product line for getting the enhanced convenience and consistent sound.

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • White or black finish that blends unobtrusively with most surroundings
  • Interchangeable cartridges that provide an optimal polar pattern choice for each application
Shure MX202
  • Transducer: Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 50Hz - 17kHz
  • Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
  • Sensitivity: -35.0dBV/Pa (17.8 mV)
  • Max Input Sound Level (SPL): 124.2dB
  • Dynamic Range (Typical): 96.2 dB, (@ 1 kW Load)
  • Signal-to-Noise Ratio: 66.0dB, (Referenced @ 94 dB SPL) 
  • Equivalent Output Noise (A-weighted): 28.0dB SPL
  • Common Mode Rejection: 45.0dB minimum
  • Clipping Indicator: Preamplifier Output Clipping Level (1% THD) 
  • -6.0 dBV (0.5 V)
  • -12 dBV at 0 gain
  • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  • Temperature: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) 
  • Relative Humidity: 0 to 95%
  • Power Requirements: Phantom, 11 to 52VDC phantom, 2.0mA
  • Pad: None
  • Low Frequency Roll-Off: None
  • Applications: Choirs and Performance Groups, Stage, etc.
  • Dimensions: Microphone: 5.69 x .46" LxDiameter
    Mounting Plate: 4.45 x 2.70" (113.0 x 68.6mm) LxW
    Cable: 30' (9m)
  • Weight: 17.8 oz. (504.6 g)

Packaging Info

  • Package Weight: 0.975 lb
  • Box Dimensions (LxWxH): 10 x 4.75 x 3.15"