Sonifex RB-DHD6 Digital 6 Way Stereo Headphone Distribution Amplifier

Vendor: Sonifex
Sonifex RB-DHD6 Digital 6 Way Stereo Headphone Distribution Amplifier AES/EBU or S/PDIF digital input signals are received by the 1U rack-mount RB-DHD6 digital 6-way headphone distribution amplifier, which then converts them into six...
$1,077.00
Title

Sonifex RB-DHD6 Digital 6 Way Stereo Headphone Distribution Amplifier

AES/EBU or S/PDIF digital input signals are received by the 1U rack-mount RB-DHD6 digital 6-way headphone distribution amplifier, which then converts them into six independently buffered, jack-plug headphone outputs, each with its volume control. The RB-DHD6 connects directly to an AES/EBU or S/PDIF output to deliver the best possible audio quality to the headphones. It is useful for connecting to digital mixing desks, digital routers, and matrices. One balanced XLR-3 for the AES/EBU input and one unbalanced phono connection for the S/PDIF input make up the input connectors. The rear panel features a button that allows you to choose between the AES/EBU or S/PDIF input, and a dipswitch controls the output's de-emphasis. When de-emphasis is enabled, specific channel status bits in the incoming digital audio data will cause the RB-DHD6 to decode 50/15µs emphasis. When the unit is not in sync with the incoming digital signal, the power LED on the front panel flashes red and amber.

Audio Specification

Output Level: Drives 150mW into 32Ω to 600Ω headphones
Dynamic Range: >100dB
Input Impedance: 110Ω ±20% AES/EBU 75Ω ±15% S/PDIF
Max Output Level: +12dBu unbalanced
Headphone Gain Range: -80dBu to +12dBu
Sample Frequency Range: 30kHz-100kHz
   

Connections

Digital Inputs: 1 x AES/EBU XLR 3 pin female,
1 x S/PDIF RCA phono
Headphone Outputs: 6 x ¼” (6.35mm) A/B-gauge 3-pole stereo jack sockets
Mains Input: Filtered IEC, 110V-120V, or 220-240V, fused, 10W max
Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
   

Operational Controls

De-emphasis On/Off: DIP switch selection
Digital Input Select: AES/EBU or S/PDIF, via push-switch
   

Equipment Type

RB-DHD6: Digital 6 way stereo headphone distribution amplifier
   

Physical Specification

Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed): 58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight: Nett: 1.6kg  Gross: 2.2kg
Nett: 3.5lbs Gross: 4.8lbs