Community V2-8BT, Full-Range 2-Way 8-Inch 90 X 70 70V/100V Black & White Speaker

Vendor: Community
Community V2-8BT, Full-Range 2-Way 8-Inch 90 X 70 70V/100V Black & White Speaker The V2-8 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but...
$630.00
Color
Black
White

Community V2-8BT, Full-Range 2-Way 8-Inch 90 X 70 70V/100V Black & White Speaker

The V2-8 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers, and airports. When paired with a subwoofer such as the V2-210S, a V2-8 system will produce a high-fidelity, broad-spectrum sound that belies its modest size. The V2-8 is also an excellent choice for ancillary delay applications. When used to augment a front-of-house system in such venues as auditoria, theaters, and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under-balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-8 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-8 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions. An optional model with a built-in 100W autoformer with taps at 100W, 50W, 25W, and 12.5W (model V2-8T) is also available from the factory.

NOTES: COLOR WHITE PICTURE IS NOT AVAILABLE

Main Key Features

  • DYNA-TECH™ driver protection circuitry
  • Ferrofluid-treated HF driver for improved heat dissipation
  • Carbon Ring Cone Technology provides 30% more piston the area with increased excursion capability
  • Constant-directivity rotatable square horn
  • Terminal strip and NL4-compatible connectors
  • Available in standard black or white finishes
  • Mounting yoke included with 10° and 20° vertical standoffs
  • Optional V2-8T autoformer model for 70V/100V applications

Loudspeaker Type: Compact two-way, full-range, trapezoidal, vented bass, user rotatable horn
Operating Range:
70 Hz to 18 kHz (-10 dB)
Frequency Response: 1
00 Hz to 16 kHz (±3 dB)
Max Input Ratings:
150W continuous, 375W program
34.6 volts RMS, 69.2 volts momentary peak
Sensitivity (1W/1m):
92 dB (100 Hz to 12.5 kHz) freespace
Maximum Output: 114 dB SPL / 120 dB SPL (peak)
Nominal Impedance:
8 ohms
Minimum Impedance:
6.1 ohms @ 180 Hz
Nominal –6dB Beamwidth:
90° H x 70° V (in verticalposition)
Crossover Frequency: 1.3 kHz
Recommended Signal Processing:
90 Hz, 24 dB/octave Butterworth high pass filter
Drivers:
LF 1 x 8-inch cone
HF 1 x 1-inch
Driver Protection:
DYNA-TECH protection circuitry
Input Connection:
NL4-compatible locking connector with a terminal strip in parallel
Controls:
None
Enclosure:
Trapezoidal (22.5° included angle) 18mm,11-ply cross-laminated birch
Mounting/Rigging Provisions:
9 x M6 threaded rigging fittings
4 x M6 threaded fittings for V-HSS and third-party suspension products
Finish:
Catalyzed polyester two-part paint, black or white
Grille:
Powder-coated steel, black or white finish
Required Accessories:
None
Supplied Accessories:
Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt
Optional Accessories:
CMKIT ceiling mount kit
V-HSS handle and stand socket
VB-TILT tilting bracket
VB-VY8 vertical yoke bracket
M6EYBLTKIT 6mm eyebolt kit
Dimensions:
Height: 17 inches (433 mm)
Width: 11.3 inches (287 mm)
Depth: 11.7 inches (298 mm)
Weight (incl. bracket):
25.3 lbs (11.5 kg)
27.3 lbs (12.5 kg) with autoformer
Model Options:
V2-8B (low impedance, black finish)
V2-8W (low impedance, white finish)
V2-8BT (built-in autofomer for 70V100V applications, black finish)
V2-8WT (built-in autofomer for 70V100V applications, whitefish)