Sonifex AVN-AI04 4 Input, 4 Output, Dante® Interface, PoE
Vendor: Sonifex
Available
Sonifex AVN-AI04 4 Input, 4 Output, Dante® Interface, PoE
The Sonifex AVN-AIO4 allows you to integrate Dante networking into your building. With its four XLR inputs and four XLR outputs, this single-rack-space interface enables you to convert up to four inputs and four outputs to and from the Dante Audio-over-IP (AoIP) networking standard using its one RJ45 connection. Additionally, the device receives power over Ethernet (PoE) from the RJ45 connector. For added compatibility, the system supports the AES67 digital protocol. Up to 32 bits of resolution and 96 kHz of sampling rate are supported by the AVN-AIO4. There are only two input and output channels accessible simultaneously at rates higher than 48 kHz. Sonifex offers a firmware update that allows for four 96 kHz input/output channels.
Key Features
- 4 balanced analog inputs on XLR
- 4 balanced analog outputs on XLR
- Adjustable global 0dBFS line-up selection (+12 / +18 / +24 dBu)
- RJ45 Dante connector (1Gb/s Ethernet port)
- PoE, Link, and Clock LED status indicators
- Configuration using Dante Controller
- AES67 operation & Dante Domain Manager compliant
- Powered by PoE
- 1 RU 19” rackmount form factor
Channels of I/O |
Analog: 4 Inputs / 4 Outputs at 48 kHz Analog: 2 Inputs / 2 Outputs at 96 kHz |
Maximum Sampling Rate | 96 kHz / 32-Bit |
Number of Microphone Inputs | No |
Analog Audio I/O |
4x XLR 3-Pin Balanced Line Input 4x XLR 3-Pin Balanced Line Output |
Digital Audio I/O | No |
Host Connection | No |
OS Compatibility | Windows |
Power Requirements | PoE |
Channels of I/O |
Analog: 4 Inputs / 4 Outputs at 48 kHz Analog: 2 Inputs / 2 Outputs at 96 kHz |
Built-In DSP | No |
Maximum Sampling Rate | 96 kHz / 32-Bit |
Number of Microphone Inputs | No |
Built-In Microphone | No |
Expansion Slots | No |
Pad | No |
High-Pass Filter | No |
Solo/Mute | No |
Analog Audio I/O |
4x XLR 3-Pin Balanced Line Input 4x XLR 3-Pin Balanced Line Output |
Phantom Power | No |
Digital Audio I/O | No |
Host Connection | No |
Host Connection Protocol | No |
USB (Non-Host) | No |
Sync I/O | No |
Network I/O | 1x RJ45 Dante (PoE) |
MIDI I/O | No |
Wireless | No |
Frequency Response |
XLR Line Inputs: 20 Hz to 20 kHz ±0.2 dB XLR Line Outputs: 20 Hz to 20 kHz ±0.5 dB |
Maximum Input Level | +24 dBu for 0 dBFS |
Maximum Output Level | +24 dBu at 0 dBFS |
Impedance |
XLR Line Inputs: > 20 Kilohms (Balanced) XLR Line Outputs: < 50 Ohms (Balanced) |
SNR |
XLR Line Inputs: -110 dBFS (20 kHz BW, Rs=200 Ohms) XLR Line Outputs: -107 dBFS (20 kHz BW) |
THD+N |
XLR Line Inputs: < -110 dBFS (-30 dBFS, 20 Hz to 20 kHz, 20 kHz BW) XLR Line Outputs: < -107 dBFS (-30 dBFS, 20 Hz to 20 kHz, 20 kHz BW) |
Sample Rates | 44.1 / 48 / 88.2 / 96 kHz (LPCM, AD/DA Conversion) |
Sample Rate Conversion | On Digital Inputs |
Bit Depths | 24-Bit |
Sync Sources | Dante |
Media/Memory Card Slot | No |
OS Compatibility | Windows |
Mobile App Compatible | No |
Power Requirements | PoE |
Power Consumption | 4.5 W (Typical) |
Rackmount Size | 1 RU |
Dimensions | 18.9 x 4.3 x 1.7" / 48 x 11 x 4.3 cm |
Weight | 1.9 lb / 0.9 kg |